Flanged Sleeve Spacer Type

Home  |   Contact  |   Site Map

Boston Gear

Nuttall Gear

Ameridrive Couplings

Bookmark and Share

Amerigear Flanged Sleeve Series F Couplings

Flanged Sleeve Spacer Type

Application: Commonly used on pump and compressor drives where maintenance or replacement of shaft seals or bearings is accomplished without moving connected equipment. This arrangement is normally used in place of Series FS in tandem arrangements where shaft spacing is minimum and where low weight and WR 2 are important.

Description: Amerigear Series FE Flexible Coupling consists of two standard halves assembled to the spacer element. The accurately machined steel spacer may be furnished to desired length. For coupling dimensions, refer to Series F. See engineering section for speed and torque ratings. Step-down spacers are available for connecting half coupling of different sizes.

To save the document right-click on the link and select 'Save Target As'.

« back to Ameridrives Coupling Products
Amerigear Flanged Sleeve Series F Couplings

Interested in Amerigear Flanged Sleeve Series F Couplings?

To order any Flanged Sleeve Spacer Type, get a quote or for more information please contact us below or call us on 01827 575 61!

*
*



 
home